Product Description
Refrigerated Compressed Air Dryer (Built-In Pre-Cooler)
Detailed Photos
Principle of working :
The amount of water vapor in the air compression by compressed air temperature determined: in case of compressed air pressure is basically the same, reduce the temperature of the air compressed compression to reduce the amount of water vapor in the air, and the excess water vapor will condense into liquid.
Freezing dryer is according to the corresponding relationship between the saturation water vapor pressure and temperature, use refrigeration device makes the compressed air is cooled to a certain dew point temperature, precipitation containing water, through the steam water separator and electric drainage device will discharge water, so that the compressed air can be dry.
Product Parameters
| Model |
Air Capacity (Nm3/min) |
Voltage (V) |
Fan Power (W) |
Air connector dia | Net weight (Kg) |
Lenghth (mm) |
Wideth (mm) |
Height (mm) |
Air flow (Nm3/n) |
| SDLF-0.5HT | 0.65 | 220 | 80 | G1″ | 54 | 400 | 560 | 730 | 820 |
| SDLF-1HT | 1.2 | 220 | 80 | G1″ | 57 | 400 | 560 | 730 | 820 |
| SDLF-2HT | 2.5 | 220 | 100 | G1″ | 66 | 520 | 640 | 890 | 1640 |
| SDLF-3HT | 3.6 | 220 | 135 | G1″ | 79 | 520 | 640 | 890 | 2670 |
| SDLF-4.5HT | 5.0 | 220 | 250 | G1-1/2″ | 86 | 540 | 700 | 1000 | 4650 |
| SDLF-6HT | 6.8 | 220 | 250 | G1-1/2″ | 90 | 540 | 700 | 1000 | 4650 |
| SDLF-8HT | 8.5 | 220 | 270 | G2″ | 99 | 610 | 900 | 1070 | 5700 |
| SDLF-10HT | 10.9 | 380/220 | 260 | G2″ | 113 | 610 | 900 | 1070 | 5700 |
| SDLF-12HT | 12.8 | 380/200 | 260 | G2″ | 113 | 610 | 900 | 1070 | 5700 |
Note: The above models use plate/plate-fin heat exchangers.
Company Profile
Certifications
Packaging & Shipping
FAQ
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Ok |
|---|---|
| Warranty: | 15 Months |
| Flow: | Cross Flow |
| Material Status: | Bulk |
| Drying Medium: | Air |
| Structure: | All Kinds |
| Samples: |
US$ 400/Piece
1 Piece(Min.Order) | |
|---|
| Customization: |
Available
|
|
|---|
.webp)
What are the advantages of using an air compressor in construction?
Using an air compressor in construction offers numerous advantages that contribute to increased efficiency, productivity, and versatility. Here are some key benefits of using air compressors in construction:
- Powering Pneumatic Tools: Air compressors are commonly used to power a wide range of pneumatic tools on construction sites. Tools such as jackhammers, nail guns, impact wrenches, drills, and sanders can be operated using compressed air. Pneumatic tools are often preferred due to their lightweight, compact design and ability to deliver high torque or impact force.
- Efficient Operation: Air compressors provide a continuous and reliable source of power for pneumatic tools, allowing for uninterrupted operation without the need for frequent battery changes or recharging. This helps to maintain a smooth workflow and reduces downtime.
- Portability: Many construction air compressors are designed to be portable, featuring wheels or handles for easy maneuverability on job sites. Portable air compressors can be transported to different areas of the construction site as needed, providing power wherever it is required.
- Versatility: Air compressors are versatile tools that can be used for various applications in construction. Apart from powering pneumatic tools, they can also be utilized for tasks such as inflating tires, cleaning debris, operating air-operated pumps, and powering air horns.
- Increased Productivity: The efficient operation and power output of air compressors enable construction workers to complete tasks more quickly and effectively. Pneumatic tools powered by air compressors often offer higher performance and faster operation compared to their electric or manual counterparts.
- Cost Savings: Air compressors can contribute to cost savings in construction projects. Pneumatic tools powered by air compressors are generally more durable and have longer lifespans compared to electric tools. Additionally, since air compressors use compressed air as their power source, they do not require the purchase or disposal of batteries or fuel, reducing ongoing operational expenses.
- Reduced Electrocution Risk: Construction sites can be hazardous environments, with the risk of electrocution from electrical tools or equipment. By utilizing air compressors and pneumatic tools, the reliance on electrical power is minimized, reducing the risk of electrocution accidents.
It is important to select the appropriate air compressor for construction applications based on factors such as required air pressure, volume, portability, and durability. Regular maintenance, including proper lubrication and cleaning, is crucial to ensure the optimal performance and longevity of air compressors in construction settings.
In summary, the advantages of using air compressors in construction include powering pneumatic tools, efficient operation, portability, versatility, increased productivity, cost savings, and reduced electrocution risk, making them valuable assets on construction sites.
.webp)
How are air compressors utilized in pneumatic tools?
Air compressors play a crucial role in powering and operating pneumatic tools. Here’s a detailed explanation of how air compressors are utilized in pneumatic tools:
Power Source:
Pneumatic tools rely on compressed air as their power source. The air compressor generates and stores compressed air, which is then delivered to the pneumatic tool through a hose or piping system. The compressed air provides the force necessary for the tool to perform various tasks.
Air Pressure Regulation:
Air compressors are equipped with pressure regulation systems to control the output pressure of the compressed air. Different pneumatic tools require different air pressure levels to operate optimally. The air compressor’s pressure regulator allows users to adjust the output pressure according to the specific requirements of the pneumatic tool being used.
Air Volume and Flow:
Air compressors provide a continuous supply of compressed air, ensuring a consistent air volume and flow rate for pneumatic tools. The air volume is typically measured in cubic feet per minute (CFM) and determines the tool’s performance capabilities. Higher CFM ratings indicate that the pneumatic tool can deliver more power and operate at a faster rate.
Tool Actuation:
Pneumatic tools utilize compressed air to actuate their mechanical components. For example, an air-powered impact wrench uses compressed air to drive the tool’s internal hammer mechanism, generating high torque for fastening or loosening bolts and nuts. Similarly, air-powered drills, sanders, nail guns, and spray guns rely on compressed air to power their respective operations.
Versatility:
One of the significant advantages of pneumatic tools is their versatility, and air compressors enable this flexibility. A single air compressor can power a wide range of pneumatic tools, eliminating the need for separate power sources for each tool. This makes pneumatic tools a popular choice in various industries, such as automotive, construction, manufacturing, and woodworking.
Portability:
Air compressors come in different sizes and configurations, offering varying degrees of portability. Smaller portable air compressors are commonly used in applications where mobility is essential, such as construction sites or remote locations. The portability of air compressors allows pneumatic tools to be used in various work environments without the constraints of being tethered to a fixed power source.
Overall, air compressors are integral to the functionality and operation of pneumatic tools. They provide the necessary power, air pressure regulation, and continuous airflow required for pneumatic tools to perform a wide range of tasks efficiently and effectively.
.webp)
What is the role of air compressor tanks?
Air compressor tanks, also known as receiver tanks or air receivers, play a crucial role in the operation of air compressor systems. They serve several important functions:
1. Storage and Pressure Regulation: The primary role of an air compressor tank is to store compressed air. As the compressor pumps air into the tank, it accumulates and pressurizes the air. The tank acts as a reservoir, allowing the compressor to operate intermittently while providing a steady supply of compressed air during periods of high demand. It helps regulate and stabilize the pressure in the system, reducing pressure fluctuations and ensuring a consistent supply of air.
2. Condensation and Moisture Separation: Compressed air contains moisture, which can condense as the air cools down inside the tank. Air compressor tanks are equipped with moisture separators or drain valves to collect and remove this condensed moisture. The tank provides a space for the moisture to settle, allowing it to be drained out periodically. This helps prevent moisture-related issues such as corrosion, contamination, and damage to downstream equipment.
3. Heat Dissipation: During compression, air temperature increases. The air compressor tank provides a larger surface area for the compressed air to cool down and dissipate heat. This helps prevent overheating of the compressor and ensures efficient operation.
4. Pressure Surge Mitigation: Air compressor tanks act as buffers to absorb pressure surges or pulsations that may occur during compressor operation. These surges can be caused by variations in demand, sudden changes in airflow, or the cyclic nature of reciprocating compressors. The tank absorbs these pressure fluctuations, reducing stress on the compressor and other components, and providing a more stable and consistent supply of compressed air.
5. Energy Efficiency: Air compressor tanks contribute to energy efficiency by reducing the need for the compressor to run continuously. The compressor can fill the tank during periods of low demand and then shut off when the desired pressure is reached. This allows the compressor to operate in shorter cycles, reducing energy consumption and minimizing wear and tear on the compressor motor.
6. Emergency Air Supply: In the event of a power outage or compressor failure, the stored compressed air in the tank can serve as an emergency air supply. This can provide temporary air for critical operations, allowing time for maintenance or repairs to be carried out without disrupting the overall workflow.
Overall, air compressor tanks provide storage, pressure regulation, moisture separation, heat dissipation, pressure surge mitigation, energy efficiency, and emergency backup capabilities. They are vital components that enhance the performance, reliability, and longevity of air compressor systems in various industrial, commercial, and personal applications.
editor by CX 2024-04-25
China high quality CHINAMFG Guangzhou China Manufacturer Car Reparis Tool Equipment Direct Drive Oil Free Screw Air Compressor CE Europe lowes air compressor
Product Description
Product Description
Screw Air Compressor
| Screw Air Compressor A Series | |||||||
| Model | BD-10A | BD-15A | BD-20A | BD-30A | BD-40A | BD-50A | |
|
Air Volumn(m³/h) Air Pressure(Mpa) |
1.35/0.7 | 1.8/0.7 | 2.5/0.7 | 3.8/0.7 | 5.2/0.7 | 6.5/0.7 | |
| 1.2/0.8 | 1.6/0.8 | 2.3/0.8 | 3.4/0.8 | 5.0/0.8 | 6.1/0.8 | ||
| 1.0/1.0 | 1.3/1.0 | 2.0/1.0 | 3.1/1.0 | 4.3/1.0 | 5.5/1.0 | ||
| 0.8/1.2 | 1.0/1.2 | 1.7/1.2 | 2.7/1.2 | 3.8/1.2 | 4.9/1.2 | ||
| Ambient Temperature | -5~+45ºC | ||||||
| Cooling Way | Air Cooling | ||||||
|
Discharge Temperature |
Ambient Temperature<15ºC | ||||||
| Lubrication – oil | 6L | 12L | 18L | 20L | 20L | 20L | |
| Noise | 66±2 | 68±2 | |||||
| Driving Way | Belt Drive | Direct Drive | |||||
| Electricity | 380V 3PH 50Hz | ||||||
| Power | 7.5KW | 11KW | 15KW | 22KW | 30KW | 37KW | |
| Starting Method | Star-Delta Starting | ||||||
| Dimension | L | 960mm | 1100mm | 1100mm | 1380mm | 1500mm | 1500mm |
| W | 580mm | 710mm | 710mm | 850mm | 1000mm | 1000mm | |
| H | 770mm | 1100mm | 1100mm | 1250mm | 1350mm | 1350mm | |
| Net Weight | 178KG | 327KG | 337KG | 500KG | 683KG | 683KG | |
| Outlet Pipe Diameter | 1/2” | 1” | 1” | 5/4” | 3/2” | 3/2” | |
Direct drive screw air compressor
Connet with rotor, motor and it’s outer case form a unit which can achieve zero maintenance. Besides, due to less spare parts, direct drive has less transmission loss to make it more table and get longer life.
.
Company Profile
PRODUCT SHOWROOM:
MEETING ROOM:
FACTORY VIEW:
TRADE SHOWS:
FAQ
Q1:Are you Manufacturer or Trading Company?
A:We are a professional manufacturer with our own export department.
Our factory was established in 2000.
Q2:Where is your factory located? How can I visit there?
A:Our company is located in HangZhou City, China.All clients, from home and abroad,are warmly welcomed to visit us.
Q3. What is your terms of packing?
A: Generally, we pack our goods by thicker bubble paper, some of them are packed by carton.
Q4. What is your terms of payment?
A: By T/T, 30% as deposit for production, and 70% balance before delivery. We’ll show you the photos of the products and packages before you pay the balance.
Q5. What is your terms of delivery?
A: Normally our quotation is under FOB HangZhou, but we also accept EXW, FOB, CFR, CIF, DDU.
Q6. How about your delivery time?
A: Generally, it will take 10 to 15 days after receiving full payment. If your voltage is different from 380V/3PH/50Hz, the delivery time will be around 20 days for custom-made motors or electric components.
Q7.Can we customize our product?
A:Yes,you can.Customized material and standard are acceptable. We can provide different standards according to your market and favor.
Q8: How do you make our business long-term and good relationship?
A1. We keep good quality and competitive price to ensure our customers benefit ;
A2. We respect every customer as our friend and we sincerely do business and make friends with them.
/* January 22, 2571 19:08:37 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1
| After-sales Service: | Online Service |
|---|---|
| Warranty: | 12 Months |
| Lubrication Style: | Oil-free |
| Cooling System: | Air Cooling |
| Power Source: | Diesel Engine |
| Cylinder Position: | Horizontal |
| Customization: |
Available
|
|
|---|
.webp)
What role do air dryers play in compressed air systems?
Air dryers play a crucial role in compressed air systems by removing moisture and contaminants from the compressed air. Compressed air, when generated, contains water vapor from the ambient air, which can condense and cause issues in the system and end-use applications. Here’s an overview of the role air dryers play in compressed air systems:
1. Moisture Removal:
Air dryers are primarily responsible for removing moisture from the compressed air. Moisture in compressed air can lead to problems such as corrosion in the system, damage to pneumatic tools and equipment, and compromised product quality in manufacturing processes. Air dryers utilize various techniques, such as refrigeration, adsorption, or membrane separation, to reduce the dew point of the compressed air and eliminate moisture.
2. Contaminant Removal:
In addition to moisture, compressed air can also contain contaminants like oil, dirt, and particles. Air dryers help in removing these contaminants to ensure clean and high-quality compressed air. Depending on the type of air dryer, additional filtration mechanisms may be incorporated to enhance the removal of oil, particulates, and other impurities from the compressed air stream.
3. Protection of Equipment and Processes:
By removing moisture and contaminants, air dryers help protect the downstream equipment and processes that rely on compressed air. Moisture and contaminants can negatively impact the performance, reliability, and lifespan of pneumatic tools, machinery, and instrumentation. Air dryers ensure that the compressed air supplied to these components is clean, dry, and free from harmful substances, minimizing the risk of damage and operational issues.
4. Improved Productivity and Efficiency:
Utilizing air dryers in compressed air systems can lead to improved productivity and efficiency. Dry and clean compressed air reduces the likelihood of equipment failures, downtime, and maintenance requirements. It also prevents issues such as clogging of air lines, malfunctioning of pneumatic components, and inconsistent performance of processes. By maintaining the quality of compressed air, air dryers contribute to uninterrupted operations, optimized productivity, and cost savings.
5. Compliance with Standards and Specifications:
Many industries and applications have specific standards and specifications for the quality of compressed air. Air dryers play a vital role in meeting these requirements by ensuring that the compressed air meets the desired quality standards. This is particularly important in industries such as food and beverage, pharmaceuticals, electronics, and automotive, where clean and dry compressed air is essential for product integrity, safety, and regulatory compliance.
By incorporating air dryers into compressed air systems, users can effectively control moisture and contaminants, protect equipment and processes, enhance productivity, and meet the necessary quality standards for their specific applications.
What are the environmental considerations when using air compressors?
When using air compressors, there are several environmental considerations to keep in mind. Here’s an in-depth look at some of the key factors:
Energy Efficiency:
Energy efficiency is a crucial environmental consideration when using air compressors. Compressing air requires a significant amount of energy, and inefficient compressors can consume excessive power, leading to higher energy consumption and increased greenhouse gas emissions. It is important to choose energy-efficient air compressors that incorporate features such as Variable Speed Drive (VSD) technology and efficient motor design, as they can help minimize energy waste and reduce the carbon footprint.
Air Leakage:
Air leakage is a common issue in compressed air systems and can contribute to energy waste and environmental impact. Leaks in the system result in the continuous release of compressed air, requiring the compressor to work harder and consume more energy to maintain the desired pressure. Regular inspection and maintenance of the compressed air system to detect and repair leaks can help reduce air loss and improve overall energy efficiency.
Noise Pollution:
Air compressors can generate significant noise levels during operation, which can contribute to noise pollution. Prolonged exposure to high noise levels can have detrimental effects on human health and well-being and can also impact the surrounding environment and wildlife. It is important to consider noise reduction measures such as sound insulation, proper equipment placement, and using quieter compressor models to mitigate the impact of noise pollution.
Emissions:
While air compressors do not directly emit pollutants, the electricity or fuel used to power them can have an environmental impact. If the electricity is generated from fossil fuels, the associated emissions from power plants contribute to air pollution and greenhouse gas emissions. Choosing energy sources with lower emissions, such as renewable energy, can help reduce the environmental impact of operating air compressors.
Proper Waste Management:
Proper waste management is essential when using air compressors. This includes the appropriate disposal of compressor lubricants, filters, and other maintenance-related materials. It is important to follow local regulations and guidelines for waste disposal to prevent contamination of soil, water, or air and minimize the environmental impact.
Sustainable Practices:
Adopting sustainable practices can further reduce the environmental impact of using air compressors. This can include implementing preventive maintenance programs to optimize performance, reducing idle time, and promoting responsible use of compressed air by avoiding overpressurization and optimizing system design.
By considering these environmental factors and taking appropriate measures, it is possible to minimize the environmental impact associated with the use of air compressors. Choosing energy-efficient models, addressing air leaks, managing waste properly, and adopting sustainable practices can contribute to a more environmentally friendly operation.
.webp)
What are the different types of air compressors?
There are several different types of air compressors, each with its own unique design and operating principle. Here’s an overview of the most commonly used types:
1. Reciprocating Air Compressors: Reciprocating air compressors, also known as piston compressors, use one or more pistons driven by a crankshaft to compress air. They operate by drawing air into a cylinder, compressing it with the piston’s up-and-down motion, and discharging the compressed air into a storage tank. Reciprocating compressors are known for their high pressure capabilities and are commonly used in industrial applications.
2. Rotary Screw Air Compressors: Rotary screw air compressors utilize two interlocking screws to compress air. As the male and female screws rotate, the air is trapped between them and gradually compressed as it moves along the screw threads. These compressors are known for their continuous duty cycle, high efficiency, and quiet operation. They are widely used in industrial, commercial, and automotive applications.
3. Centrifugal Air Compressors: Centrifugal air compressors rely on the principle of centrifugal force to compress air. They use a high-speed impeller to accelerate the incoming air and then convert the kinetic energy into pressure energy. Centrifugal compressors are commonly used in large-scale industrial applications that require high volumes of compressed air.
4. Rotary Vane Air Compressors: Rotary vane air compressors employ a rotor with sliding vanes that compress the air. As the rotor rotates, the vanes slide in and out of the rotor, creating compression chambers. Air is drawn in, trapped, and compressed as the vanes move. These compressors are compact, reliable, and suitable for small to medium-sized applications.
5. Axial Flow Air Compressors: Axial flow air compressors are primarily used in specialized applications such as aircraft engines and gas turbines. They utilize a series of rotating and stationary blades to compress air in a continuous flow. Axial flow compressors are known for their high flow rates and are designed for applications that require large volumes of compressed air.
6. Scroll Air Compressors: Scroll air compressors consist of two interlocking spirals or scrolls that compress the air. One spiral remains stationary while the other orbits around it, creating a series of expanding and contracting pockets that compress the air. Scroll compressors are compact, reliable, and commonly used in applications where low noise and oil-free air are required, such as medical and dental equipment.
These are just a few examples of the different types of air compressors available. Each type has its own advantages, capabilities, and ideal applications. The choice of air compressor depends on factors such as required pressure, flow rate, duty cycle, noise level, oil-free operation, and specific application requirements.
editor by CX 2024-04-09
China OEM 700 Cfm 18 Bar Portable Diesel Driven High Pressure Screw Air Compressor air compressor for car
Product Description
Product Description
Everyone is very concerned about the development trend of the water well drilling machine Drilling operation is an important process in the process of taking the water. Generally common types include rotary rigs, shock drills, and composite rigs. They have certain requirements for different geological characteristics, so they have certain requirements for the drill drill motivation.
A variety of screw air compressors just solve this problem. With strong motivation, the well drilling rigns can calmly cope with various complex geology, bringing users a highly efficient and economical experience.
Product feature
1. More strong and more energy -saving new air compressor host
Two -level compression, the latest patent screw rotor, higher efficiency; the level of energy efficiency is 10%higher than similar products, more energy saving; heavy high -intensity design, high -quality CHINAMFG bear 40BAR design, the optimal air compressor structure and reliability.
2. High -quality heavy -duty diesel engine
High -efficiency Edao high -voltage co -track fuel system; supporting heavy diesel engines such as Conominus and Weichai; the intelligent control system accurately controls the fuel injection volume to achieve the best power output within the scope of the entire transport; stronger power, higher reliability , Better fuel economy; meet the requirements of the 3 emissions of the country.
3. Intelligent control system
Display the interface intuitive, multi-language intelligent controller, simple operation;
Real -time display speed, gas supply pressure, oil pressure, exhaust temperature, coolant. Temperature, fuel liquid level and other operating parameters
It has self -diagnosis faults, alarm and stopping protection functions to ensure the safe operation of unattended time; optional remote monitoring systems and mobile phone APP functions.
4. Efficient cooling system
High -efficiency and reliable system configuration to ensure that the whole machine is in the best operating state; independent oil, gas, liquid cooler, large diameter high -efficiency fan, smooth air passage; adapting to the climate of the severe cold, hot summer, and the extreme environment of the plateau.
5. Large capacity heavy load air filtration system and oil and gas separation system
Whirlwind high -quality heavy load main air filter, dual filtration, filtering off the dust and other debris particles in the air, ensuring the minimum loss of diesel and air compressor hosts in bad operating conditions, extending the life of the machine;
Adapt to the dedicated efficient oil and gas separation systems that have changed the operating conditions such as drilling machines and well drilling to ensure that the air quality of the air and gas after the separation of oil and gas under various types of working conditions meets the requirements of 3PPM, and extend the cycle of the use of oil core.
6. High -quality and reliable air compressor coolant and lubrication system
Under low and high temperature environment, the stability of the liquid chemical ingredients and physical characteristics of the cooling and high temperature environment is good, and the coordinates are not deteriorated.
Multi -oil filter design and constant temperature control can ensure the minimum loss under bad working conditions and extend the life of the machine.
7. Rich customized options
Optional 2 -industrial air compressor host and control system to meet the efficient construction of various operations;
The optional low -temperature starting system, the fuel coolant heater makes the temperature of the diesel engine coolant, lubricating oil, and the temperature of the whole machine continuously improved to ensure the start of the diesel engine in severe cold and plateau environment;
Optional cooler to ensure that the exhaust temperature is not higher than the ambient temperature by 15 ° C; the optional air pre -filter can ensure that the diesel engine and the air compressor in the high dust environment are far from early wear;
The optional remote monitoring system and mobile app function, management becomes easy.
8.Higher income and easier and easy maintenance
A variety of innovative designs can effectively reduce the cost of customer use and greatly improve work efficiency. Increase return on investment;
The mute hood and the full -closed chassis shock -absorbing and silencer design, running smoothly, and lower noise; spacious full open door panel, reasonable structure layout, making the maintenance air filter, oil filter oil core easy;
The peripheral layout of the components that needs to be maintained and maintenance is reasonable, the tentacles are available, and the pipeline cables are clear and convenient to shorten the time and costs of the maintenance.
Product specifications series parameters
| Model | HGS650-18W | HGS8502-22W | |
| Compressor | Engine displacement (m/min) |
18 | 24/20 |
| Discharge pressure(bar) | 18 | 16/22 | |
| Compression Grade | Grade 1 | Grade 2 | |
| Volume of storage tank(L) | 130 | 130 | |
| Volume of screw oil(L) | 80 | 90 | |
| Dieengine |
Engine manufacturer | Weichai | Weichai |
| Engine model | WP6G240E330 | WP7G300E300 | |
| Number of cylinders | 6 cylinders | 6 cylinders | |
| Rated power(kw) | 176 | 220 | |
| rated speed(rpm) | 2000 | 2000 | |
| Air rotation speed(rpm) | 1400 | 1400 | |
| Diesel engine (lubricating) oil(L) | 24 | 28 | |
| Coolant volume(L) | 60 | 70 | |
| Fuel tank capcity (L) | 270 | 300 | |
| Unit | Battery | 6-QW-165MFX2 | 6-QW-165MFX2 |
| Connection size | 1-G2″1-G1″ | 1-G2″1-G1″ | |
| Emission Standard | National 3 | Diect connection | |
| Length(mm) | 3400 | 3650 | |
| Width(mm) | 1780 | 1900 | |
| Height(mm) | 2000 | 2100 | |
| Total weight(kg) | 3200 | 4200 | |
| Operation moving way | Fixed | Fixed | |
| Model | HGS980-24C | HGS1100-2–25Y | |
| Compressor | Engine displacement (m/min) |
29/25 | 30/25 |
| Discharge pressure(bar) | 20/24 | 23/25 | |
| Compression Grade | Grade | Grade | |
| Volume of storage tank(L) | 210 | 210 | |
| Volume of screw oil(L) | 137 | 137 | |
| Diesel engine |
Engine manufacturer | Commins | Yuchai |
| Engine model | QSL8.9-C360 | YC6MK400 | |
| Number of cylinders | 6 cylinders | 6 cylinders | |
| Rated power(kw) | 264 | 294 | |
| rated speed(rpm) | 1900 | 1800 | |
| Air rotation speed(rpm) | 1400 | 1300 | |
| Diesel engine (lubricating) oil(L) | 30 | 32 | |
| Coolant volume(L) | 70 | 75 | |
| Fuel tank capcity (L) | 450 | 450 | |
| Unit | Battery | 6-QW-210MFX2 | 6-QW-210MFX2 |
| Connection size | 1-G2″1-G1″ | 1-G2″1-G1′ | |
| Emission Standard | National | National | |
| Length(mm) | 3480 | 3720 | |
| Width(mm) | 1960 | 1960 | |
| Height(mm) | 1950 | 2060 | |
| Total weight(kg) | 5100 | 5300 | |
| Operation moving way | Fixed | Fixed | |
| Model | HGS13000-30C | ||
| Compressor | Engine displacement (m/min) |
35/30 | |
| Discharge pressure(bar) | 25/30 | ||
| Compression Grade | Grade 2 | ||
| Volume of storage tank(L) | 260 | ||
| Volume of screw oil(L) | 145 | ||
| Diesel engine |
Engine manufacturer | Commins | |
| Engine model | QSZ13-C550 | ||
| Number of cylinders | 6 cylinders | ||
| Rated power(kw) | 410 | ||
| rated speed(rpm) | 1800 | ||
| Air rotation speed(rpm) | 1300 | ||
| Diesel engine (lubricating) oil(L) | 35 | ||
| Coolant volume(L) | 80 | ||
| Fuel tank capcity (L) | 550 | ||
| Unit | Battery | 6-QW-210MFX2 | |
| Connection size | 1-G2″1-G1″ | ||
| Emission Standard | National3 | ||
| Length(mm) | 3900 | ||
| Width(mm) | 2100 | ||
| Height(mm) | 2560 | ||
| Total weight(kg) | 5400 | ||
| Operation moving way | Fixed | ||
| After-sales Service: | Online |
|---|---|
| Lubrication Style: | Lubricated |
| Cooling System: | Air Cooling |
| Customization: |
Available
|
|
|---|
.shipping-cost-tm .tm-status-off{background: none;padding:0;color: #1470cc}
|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
|---|
| Payment Method: |
|
|---|---|
|
Initial Payment Full Payment |
| Currency: | US$ |
|---|
| Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
|---|
.webp)
How are air compressors utilized in the aerospace industry?
Air compressors play a crucial role in various applications within the aerospace industry. They are utilized for a wide range of tasks that require compressed air or gas. Here are some key uses of air compressors in the aerospace industry:
1. Aircraft Systems:
Air compressors are used in aircraft systems to provide compressed air for various functions. They supply compressed air for pneumatic systems, such as landing gear operation, braking systems, wing flap control, and flight control surfaces. Compressed air is also utilized for starting aircraft engines and for cabin pressurization and air conditioning systems.
2. Ground Support Equipment:
Air compressors are employed in ground support equipment used in the aerospace industry. They provide compressed air for tasks such as inflating aircraft tires, operating pneumatic tools for maintenance and repair, and powering air-driven systems for fueling, lubrication, and hydraulic operations.
3. Component Testing:
Air compressors are utilized in component testing within the aerospace industry. They supply compressed air for testing and calibrating various aircraft components, such as valves, actuators, pressure sensors, pneumatic switches, and control systems. Compressed air is used to simulate operating conditions and evaluate the performance and reliability of these components.
4. Airborne Systems:
In certain aircraft, air compressors are employed for specific airborne systems. For example, in military aircraft, air compressors are used for air-to-air refueling systems, where compressed air is utilized to transfer fuel between aircraft in mid-air. Compressed air is also employed in aircraft de-icing systems, where it is used to inflate inflatable de-icing boots on the wing surfaces to remove ice accumulation during flight.
5. Environmental Control Systems:
Air compressors play a critical role in the environmental control systems of aircraft. They supply compressed air for air conditioning, ventilation, and pressurization systems, ensuring a comfortable and controlled environment inside the aircraft cabin. Compressed air is used to cool and circulate air, maintain desired cabin pressure, and control humidity levels.
6. Engine Testing:
In the aerospace industry, air compressors are utilized for engine testing purposes. They provide compressed air for engine test cells, where aircraft engines are tested for performance, efficiency, and durability. Compressed air is used to simulate different operating conditions and loads on the engine, allowing engineers to assess its performance and make necessary adjustments or improvements.
7. Oxygen Systems:
In aircraft, air compressors are involved in the production of medical-grade oxygen for onboard oxygen systems. Compressed air is passed through molecular sieve beds or other oxygen concentrator systems to separate oxygen from other components of air. The generated oxygen is then supplied to the onboard oxygen systems, ensuring a sufficient and continuous supply of breathable oxygen for passengers and crew at high altitudes.
It is important to note that air compressors used in the aerospace industry must meet stringent quality and safety standards. They need to be reliable, efficient, and capable of operating under demanding conditions to ensure the safety and performance of aircraft systems.
How do you choose the right air compressor for woodworking?
Choosing the right air compressor for woodworking is essential to ensure efficient and effective operation of pneumatic tools and equipment. Here are some factors to consider when selecting an air compressor for woodworking:
1. Required Air Volume (CFM):
Determine the required air volume or cubic feet per minute (CFM) for your woodworking tools and equipment. Different tools have varying CFM requirements, so it is crucial to choose an air compressor that can deliver the required CFM to power your tools effectively. Make sure to consider the highest CFM requirement among the tools you’ll be using simultaneously.
2. Tank Size:
Consider the tank size of the air compressor. A larger tank allows for more stored air, which can be beneficial when using tools that require short bursts of high air volume. It helps maintain a consistent air supply and reduces the frequency of the compressor cycling on and off. However, if you have tools with continuous high CFM demands, a larger tank may not be as critical.
3. Maximum Pressure (PSI):
Check the maximum pressure (PSI) rating of the air compressor. Woodworking tools typically operate within a specific PSI range, so ensure that the compressor can provide the required pressure. It is advisable to choose an air compressor with a higher maximum PSI rating to accommodate any future tool upgrades or changes in your woodworking needs.
4. Noise Level:
Consider the noise level of the air compressor, especially if you’ll be using it in a residential or shared workspace. Some air compressors have noise-reducing features or are designed to operate quietly, making them more suitable for woodworking environments where noise control is important.
5. Portability:
Assess the portability requirements of your woodworking projects. If you need to move the air compressor frequently or work in different locations, a portable and lightweight compressor may be preferable. However, if the compressor will remain stationary in a workshop, a larger, stationary model might be more suitable.
6. Power Source:
Determine the power source available in your woodworking workspace. Air compressors can be powered by electricity or gasoline engines. If electricity is readily available, an electric compressor may be more convenient and cost-effective. Gasoline-powered compressors offer greater flexibility for remote or outdoor woodworking projects where electricity may not be accessible.
7. Quality and Reliability:
Choose an air compressor from a reputable manufacturer known for producing reliable and high-quality equipment. Read customer reviews and consider the warranty and after-sales support offered by the manufacturer to ensure long-term satisfaction and reliability.
8. Budget:
Consider your budget and balance it with the features and specifications required for your woodworking needs. While it’s important to invest in a reliable and suitable air compressor, there are options available at various price points to accommodate different budgets.
By considering these factors and evaluating your specific woodworking requirements, you can choose an air compressor that meets the demands of your tools, provides efficient performance, and enhances your woodworking experience.
.webp)
Can air compressors be used for automotive applications?
Yes, air compressors can be used for various automotive applications and are commonly found in automotive repair shops, garages, and even in some vehicles. Here are some automotive applications where air compressors are frequently utilized:
1. Tire Inflation: Air compressors are commonly used to inflate tires in automotive applications. They provide a convenient and efficient way to inflate tires to the recommended pressure, ensuring optimal tire performance, fuel efficiency, and safety.
2. Air Tools: Air compressors power a wide range of pneumatic tools used in automotive repair and maintenance. These tools include impact wrenches, ratchet wrenches, air hammers, pneumatic drills, and sanders. Air-powered tools are favored for their high torque and power-to-weight ratio, making them suitable for heavy-duty automotive tasks.
3. Spray Painting: Air compressors are commonly used in automotive painting applications. They power airbrushes and spray guns that are used to apply paint, primer, and clear coats. Air compressors provide the necessary air pressure to atomize the paint and deliver a smooth and even finish.
4. Brake System Maintenance: Air compressors play a crucial role in maintaining and diagnosing automotive brake systems. They are used to pressurize the brake lines, allowing for proper bleeding of the system and detection of leaks or faults.
5. Suspension Systems: Some automotive suspension systems, such as air suspensions, rely on air compressors to maintain the desired air pressure in the suspension components. The compressor inflates or deflates the suspension as needed to provide a comfortable ride and optimal handling.
6. Cleaning and Dusting: Air compressors are used for cleaning automotive parts, blowing away dust and debris, and drying surfaces. They provide a high-pressure stream of air that effectively cleans hard-to-reach areas.
7. Air Conditioning Systems: Air compressors are a key component in automotive air conditioning systems. They compress and circulate refrigerant, allowing the system to cool and dehumidify the air inside the vehicle.
When using air compressors for automotive applications, it’s important to consider the specific requirements of the task at hand. Ensure that the air compressor has the necessary pressure and capacity to meet the demands of the application. Additionally, use appropriate air hoses, fittings, and tools that are compatible with the compressor’s output.
Overall, air compressors are versatile and valuable tools in the automotive industry, providing efficient power sources for a wide range of applications, from tire inflation to powering pneumatic tools and supporting various automotive systems.
editor by CX 2023-10-25